Sony HT-9900M HT5950DP Instructions (entire HT system) - Page 47
Selecting the command mode of the remote, Press AV1 or AV2 while holding down, RM SET UP., Press
View all Sony HT-9900M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Operations Using the Remote RM-AAP001 Remote Button O qa V/v qa B/b qa V/v/B/b qa Operations Function VCD player/ Returns to the LD player/ previous menu or DVD player/ exits the menu. Blu-ray disc recorder/ Hard disc recorder/PSX/ Satellite tuner Receiver Selects a menu item. Receiver Adjusts or changes the setting. VCR/ Selects a menu item. DVD player/ Blu-ray disc recorder/ Hard disc recorder/PSX/ Satellite tuner Notes • The AUX, MULTI CH* and 12 buttons on the remote are not available for receiver operation. • Some functions explained in this section may not work depending on the model. • The above explanation is intended to serve as an example only. Therefore, depending on the component the above operation may not be possible or may operate differently than described. • When you press input buttons (VIDEO1, VIDEO2, VIDEO3 or DVD), the input mode of the TV might not switch to the corresponding input mode that you want. In this case, press TV/VIDEO button to switch the input mode of the TV. • To activate the buttons with orange printing, press ALT first before pressing the buttons. * HT-5950DP only Selecting the command mode of the remote Set the remote command mode using the RM SET UP button and the remote command mode buttons. Selecting the command mode You can switch the command mode (AV1 and AV2) of the remote. If the command mode of the receiver and the remote is different, you cannot use the remote to operate the receiver. To change the command mode of the receiver, see page 54. Press AV1 (or AV2) while holding down RM SET UP. The indicator flashes once (twice for AV2) , then the command mode switches. To check the command mode of the remote Press RM SET UP. You can check the remote by the indicator. Mode AV1 AV2 Indicator flashes once twice To reset the remote to factory settings Press ?/1, AV ?/1 and MASTER VOL - at the same time. The indicator flashes 3 times, then goes off. 47US