Sony HT-9900M HT5950DP Instructions (entire HT system) - Page 56

1) Measured under the following conditions: Area code Power requirements U, CA 120 V AC, 60 Hz 2) Depending on the sound field settings and the source, there may be no sound output. Inputs (Analog) MULTI CH IN*, Sensitivity: 800 mV SA-CD/CD, MD/TAPE, Impedance: 50 k ohms DVD, VIDEO 1, 2, 3 * HT-9950M, HT-9900M and HT-6900DP only. Inputs (Digital) DVD (Coaxial) VIDEO 2, SA-CD/CD (Optical) Sensitivity: - Impedance: 75 ohms Sensitivity: - Impedance: - Outputs (Analog) MD/TAPE (OUT), Voltage: 800 mV VIDEO 1 (AUDIO OUT) Impedance: 10 k ohms SUB WOOFER Voltage: 2 V Impedance: 1 k ohm Reproduction frequency range: 28 - 20,000 Hz Tone Gain levels ±6 dB, 1 dB step FM tuner section Tuning range Antenna Antenna terminals Intermediate frequency 87.5 - 108.0 MHz FM wire antenna 75 ohms, unbalanced 10.7 MHz AM tuner section Tuning range Model of area code U, CA With 10-kHz tuning scale: 530 - 1,710 kHz3) With 9-kHz tuning scale: 531 - 1,710 kHz3) Antenna Loop antenna Intermediate frequency 450 kHz 3) You can change the AM tuning scale to 9 kHz or 10 kHz. After tuning in any AM station, turn off the receiver. While holding down PRESET TUNING + or TUNING +, press ?/1. All preset stations will be erased when you change the tuning scale. To reset the scale to 10 kHz (or 9 kHz), repeat the procedure. Video section Inputs/Outputs Video: COMPONENT VIDEO: 1 Vp-p, 75 ohms Y: 1 Vp-p, 75 ohms PB/CB/B-Y: 0.7 Vp-p, 75 ohms PR/CR/R-Y: 0.7 Vp-p, 75 ohms 80 MHz HD Pass Through General Power requirements Area code U, CA Power requirements 120 V AC, 60 Hz Power consumption Area code U (STR-K9900P) U (STR-K5900P) CA (STR-K9900P) CA (STR-K5900P) Power consumption 190 W 140 W 250 VA 200 VA Power consumption (during standby mode) 0.2 W Dimensions (w/h/d) (Approx.) 430 × 157.5 × 310 mm (16 7/8 × 6 2/8 × 12 2/8 inches) including projecting parts and controls Mass (Approx.) 8.0 kg (17 lb 11 oz) 56US