Sony HT-XT1 Operating Instructions - Page 11
Useful functions, SET BT, SYSTEM, Function, Default - power off tv
View all Sony HT-XT1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Useful functions MENU (select) ENTER RETURN Menu HDMI SET BT SYSTEM CTRL (Control for HDMI) P. THRU (Pass through) ARC (Audio return channel) BT PWR (BLUETOOTH power) BT.STBY (BLUETOOTH standby) AAC (Advanced audio coding) A. STBY (Auto standby) VER (Version) SYS.RST (System cold reset) Function To switch the Control for HDMI function on or off. (ON/OFF) Refer to "Using the Control for HDMI function" (page 6) for details. To set the power saving mode of the pass-through function for HDMI signals. (AUTO/ON) AUTO: Outputs signals from the HDMI OUT jack of the system in standby mode according to the status of the TV. This setting saves power in standby mode compared with the "ON" setting. ON: Always outputs signals from the HDMI OUT jack in standby mode. If any TV other than "BRAVIA" is connected, use the system with the "ON" setting. Note: This item appears only when "CTRL (Control for HDMI)" is set to "ON." To listen to digital sound from a TV compatible with the Audio Return Channel (ARC) technology that is connected using a High Speed HDMI cable. (ON/OFF) Note: This item appears only when "CTRL (Control for HDMI)" is set to "ON." To switch the BLUETOOTH function of this system on and off. (ON/ OFF) Note: If you change the setting to "OFF," the BLUETOOTH function and the NFC function become disabled. When the system has pairing information, the system is in the BLUETOOTH standby mode even when it is turned off. (ON/OFF) To set whether or not the system will use AAC via BLUETOOTH. (ON/OFF) Note: If you change the setting when the system is connected with a BLUETOOTH device, the system will be disconnected from the device. To switch the AUTO POWER OFF function on or off. (ON/OFF) The system turns off automatically when no operation has been made within a certain period (about 20 minutes) and the system is not receiving an input signal. To display the current firmware version. To reset menus and settings (sound fields, etc.) of the system to the initial status when it does not work properly. Refer to "Troubleshooting" (page 18) for details. Default ON AUTO ON ON ON ON ON - - 11US