Sony HT-XT1 Operating Instructions - Page 12
Miscellaneous, Precautions, On safety, On power sources, On heat buildup, On placement - volume settings
View all Sony HT-XT1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Miscellaneous Precautions On safety Should any solid object or liquid fall into the system, unplug the system and have it checked by qualified personnel before operating it any further. Do not climb on the system, as you may fall down and injure yourself, or system damage may result. Do not place anything other than a TV on the system. On power sources Before operating the system, check that the operating voltage is identical to your local power supply. The operating voltage is indicated on the nameplate at the rear of the system. If you are not going to use the system for a long time, be sure to disconnect the system from the wall outlet (mains). To disconnect the AC power cord (mains lead), grasp the plug itself; never pull the cord. One blade of the plug is wider than the other for the purpose of safety and will fit into the wall outlet (mains) only one way. If you are unable to insert the plug fully into the outlet, contact your dealer. AC power cord (mains lead) must be changed only at a qualified service shop. On heat buildup Although the system heats up during operation, this is not a malfunction. If you continuously use this system at high volume, the system temperature at the back and bottom rises considerably. To avoid burning yourself, do not touch the system. On placement Leave the front of the system open. Do not place the system on top of a device that radiates heat. Place the system in a location with adequate ventilation to prevent heat buildup and prolong the life of the system. Do not place the system near heat sources or in a place subject to direct sunlight, excessive dust, or mechanical shock. Do not place anything at the rear of the system that might block the ventilation holes and cause malfunctions. If the system is being used in combination with a TV, VCR, or tape deck, noise may result and picture quality may suffer. In such a case, place the system away from the TV, VCR, or tape deck. Use caution when placing the system on a surface that has been specially treated (with wax, oil, polish, etc.), as staining or discoloration of the surface may result. Take care to avoid any possible injury from the corners of the system. Install the system so as not to harm the speaker on the bottom of this system. The speakers of this system are not of magnetically shielded type. Do not place magnetic cards or a CRT-type TV set on top of the system or near it. Notes on the glass Do not set something hot on the top such as a heated pan or pot. The glass top may be broken, cause injury, or be a cause of damage to this system. Do not impart a strong impact to the glass top. The glass top of this system is made of hardened glass; however, there is no guarantee it cannot be shattered. Heed the following so as not to break the glass: Do not impart a strong impact to the glass top by hitting it or by dropping something pointed. Do not scratch the glass with something pointed or poke it. Do not hit the side of the glass when installing in a storage rack. If the glass is broken, do not touch it with bare hands. It may cause cuts. Do not place anything on this system that weighs over 30 kg (66 Ib 2 1/4 oz). Such an item can damage the glass top or this system. A tempered glass is stouter than ordinary glass but will shatter if broken. 12US