Sony ICD-UX512BLK Operating Instructions - Page 115
Message, Cause/Remedy, Stop and Reinsert Memory
UPC - 027242819603
View all Sony ICD-UX512BLK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Message File Damaged Format Error Process Error Stop and Reinsert Memory Card Set Date&Time Track Marks are Full No File No Track Marks Low Battery Level File Protected Cause/Remedy • You cannot play back or edit files, because the data of the selected file is damaged. • The IC recorder cannot be turned on using the computer because there is no copy of the control file required for operation. Format the IC recorder using the formatting function in the menu (page 79). Do not use your computer to format the IC recorder. • The IC recorder failed in memory access. Remove and then reinsert the battery. • Save a backup copy of your data and format the IC recorder using the menu (page 79). • A memory card was inserted during recording or playback. Remove the memory card and insert it while the IC recorder is in the stop mode. • Set the clock; otherwise, you cannot set the alarm. • You can set up to 98 track marks for a file. Cancel unwanted track marks (page 60). • The selected folder does not have any files. You cannot move a file or set the alarm, etc., because of this. • There are no track marks when you attempt to erase a track mark or track marks, or divide a file at all the track mark positions. • You cannot format the memory or erase all the files in a folder because of insufficient battery power. Replace the old LR03 (size AAA) alkaline battery with a new one. Or charge the rechargeable battery (page 11) or replace the old rechargeable battery with a new one. • The selected file is protected or is a "Read only" file. You cannot erase it. Cancel the protection on the IC recorder or cancel "Read only" on your computer to edit the file using the IC recorder (page 65). Troubleshooting 115GB