Sony ILCE-6300M Help Guide Printable PDF - Page 273

of the filter and improper attachment of the hood, the filter or the hood may partially appear in the image. The optical properties of some lenses may cause the periphery of the image to appear too dark (insufficient light). You may compensate for this phenomenon with [Shading Comp.]. [335] Troubleshooting Troubleshooting Shooting still images/movies The color tones of the image displayed on the monitor/the viewfinder look unnatural. [Gamma Disp. Assist] has been activated. Set [Gamma Disp. Assist] to [Off]. [Gamma Disp. Assist] is not working properly. The [Picture Profile] settings are cancelled when you select other than [Off] for [Picture Effect] or when you use [ Silent Shooting], even if [Gamma] is set to [S-Log2] or [S-Log3]. Therefore, the color tones are not displayed correctly when [Gamma Disp. Assist] is set to [Auto]. To display the color tones properly, set [Gamma Disp. Assist] to [Off]. [336] Troubleshooting Troubleshooting Shooting still images/movies The image is blurred. Make sure that [SteadyShot] is set to [On]. The picture was taken in a dark location without the flash, resulting in camera-shake. The use of a tripod or the flash is recommended. [Hand-held Twilight] and [Anti Motion Blur] in [Scene Selection] are also effective in reducing blur. [337] Troubleshooting Troubleshooting Shooting still images/movies The monitor darkens after a short period of time passed. If you do not operate the product for a certain period of time, the product switches to the power-save mode. The product exits power-save mode when you perform operations such as pressing the shutter button halfway.