Sony ILCE-6300M Help Guide Printable PDF - Page 69
Memory recall
View all Sony ILCE-6300M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
it is recommended that you use a tripod. The longer the exposure time, the more noise will be visible on the image. After shooting, noise reduction will be done for the same amount of time that the shutter was open. However, you cannot shoot any more while noise reduction is in progress. You cannot set the shutter speed to [BULB] in the following situations: When the [Smile Shutter] function is activated. When the [Auto HDR] function is activated. When [Picture Effect] is set to [HDR Painting] or [Rich-tone Mono.]. When the [Multi Frame NR] function is activated. When the [Drive Mode] function is set to the following modes: [Cont. Shooting] [Self - timer(Cont)] [Cont. Bracket] [ Silent Shooting] If you use the above functions when the shutter speed is set to [BULB], the shutter speed is temporarily set to 30 seconds. Hint Images shot in [BULB] mode tend to be blurry. We recommend that you use a tripod or a remote commander (sold separately) that has a shutter button lock function. [43] How to Use Shooting Selecting a shooting mode Memory recall Allows you to shoot an image after recalling often-used modes or camera settings registered in advance. 1. Set the mode dial to 1 or 2 (Memory recall). 2. Press on the center of the control wheel. You can also recall registered modes or settings by selecting MENU → (Camera Settings) → [Memory recall]. Hint To recall settings registered to the memory card, set the mode dial to 1 or 2, then select the desired number by pressing the left/right side of the control wheel. Note Register shooting settings in advance by [Memory]. If you set [Memory recall] after completing the shooting settings, the registered settings