Sony ILCE-6600 Help Guide - Page 330

Help Guide Interchangeable Lens Digital Camera ILCE-6600 α6600 Controlling the camera using a smartphone (NFC One-touch remote) You can connect this product to an NFC-enabled smartphone by touching them together and then operate the product using the smartphone. Make sure that [Ctrl w/ Smartphone] is set to [On] by selecting MENU → (Network) → [Ctrl w/ Smartphone]. 1 Activate the NFC function of the smartphone. On an iPhone/iPad, launch Imaging Edge Mobile, and then select [Scan NFC/QR Code of the Camera] → [Scan NFC of the Camera] to activate the NFC function. 2 Switch this product to shooting mode. The NFC function is available only when the (N-Mark) is displayed on the screen. 3 Keep touching the smartphone to the camera for 1 to 2 seconds. The smartphone and the camera are connected. You can shoot an image via remote control while checking the composition of the image on the Imaging Edge Mobile screen. About "NFC" NFC is a technology that enables short-range wireless communication between various devices, such as mobile phones or IC tags, etc. NFC makes data communication simpler with just a touch on the designated touch-point. NFC (Near Field Communication) is an international standard of short-range wireless communication technology. Note If you cannot make a connection, do as the following: Launch Imaging Edge Mobile on your smartphone, and then move the smartphone slowly toward the product. If the smartphone is in a case, remove it. If the product is in a case, remove it. Check whether the NFC function is activated on your smartphone. (N-Mark) of this 330