Sony ILCE-6600 Help Guide - Page 565
Cleaning Mode
View all Sony ILCE-6600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 565 highlights
Help Guide Interchangeable Lens Digital Camera ILCE-6600 α6600 Cleaning Mode If dust or debris gets inside the camera and adheres to the surface of the image sensor (the part that converts the light to an electric signal), it may appear as dark spots on the image, depending on the shooting environment. If this happens, follow the steps below to clean the image sensor. 1 Confirm that the battery has been charged sufficiently. 2 MENU → (Setup) → [Cleaning Mode] → [Enter]. The image sensor vibrates a little to shake off the dust. 3 Turn off the product following the instructions on the screen. 4 Detach the lens. 5 Use the blower to clean the image sensor surface and the surrounding area. 6 Attach the lens. Hint For how to check the amount of dust on the image sensor, and for further details on cleaning methods, please refer to the following URL. https://support.d-imaging.sony.co.jp/www/support/ilc/sensor/index.php Note Clean the image sensor quickly. A blower is not supplied with this product. Use a commercially available blower. Make sure that the remaining battery level is of AC adaptor (supplied) is recommended. (3 remaining battery icons) or more, before performing the cleaning. The use Do not use a spray type blower as it may scatter water droplets inside the camera body. Do not put the tip of a blower into the cavity beyond the lens mount area, so that the tip of the blower does not touch the image sensor. 565