Sony ILCE-6600 Help Guide - Page 363

Help Guide Interchangeable Lens Digital Camera ILCE-6600 α6600 Connecting to a computer 1 Insert a sufficiently charged battery pack into the camera. 2 Turn on the camera and the computer. 3 Check that [USB Connection] under (Setup) is set to [Mass Storage]. 4 Connect the camera to the computer using the micro USB cable (supplied) (A). When you connect the camera to the computer for the first time, the procedure for recognizing the camera may start automatically on the computer. Wait until the procedure is finished. If you connect the product to your computer using the micro USB cable when [USB Power Supply] is set to [On], power is supplied from your computer. (Default setting: [On]) Note Do not turn on/off or restart the computer, or wake the computer from sleep mode when a USB connection has been established between the computer and the camera. Doing so may cause a malfunction. Before turning on/off or restarting the computer, or waking the computer from sleep mode, disconnect the camera from the computer. Related Topic USB Connection USB LUN Setting 5-009-967-11(1) Copyright 2019 Sony Corporation 363