Sony ILCE-7RM3 Help Guide Printable PDF - Page 37
Shooting still images with a higher resolution (Px. Shift Multi Shoot.)
View all Sony ILCE-7RM3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Help Guide Interchangeable Lens Digital Camera ILCE-7RM3 α7RIII Shooting still images with a higher resolution (Px. Shift Multi Shoot.) You can create images with a higher resolution than is possible with regular shooting by recording four RAW images and then combining them on a computer. This is helpful when shooting still subjects such as works of art or architecture. Select MENU → (Network) → [Ctrl w/ Smartphone] → [Ctrl w/ Smartphone] → [Off] beforehand. 1 MENU → (Setup) → [USB Connection] → [PC Remote]. 2 Connect the camera to a computer using a USB cable, and then launch Imaging Edge (Remote) on the computer. 3 Secure the camera using a tripod. Perform [Px. Shift Multi Shoot.] using Imaging Edge (Remote). The camera will record four RAW images with the selected interval. The images will be saved on the computer along with the combined image. Try to avoid camera shaking or blurring of the subject. The four RAW images are recorded with the same settings. You cannot change the settings during the interval between the recordings. You can cancel the recording by pressing the center of the control wheel during the interval between the recordings. If you will not be using a flash (sold separately), select a one-second shooting interval in Imaging Edge (Remote). If using a flash, set the interval according to the charging time of your flash. The flash-syncing speed is 1/13 second. When [Exposure step] is set to [0.5EV], the shutter speed cannot be set faster than 1/10 second. For techniques for [Px. Shift Multi Shoot.], refer to the following support site. http://www.sony.net/psms/ Hint You can also perform [Px. Shift Multi Shoot.] without using Imaging Edge (Remote). Select MENU → (Camera Settings1) → [Px. Shift Multi Shoot.] and set the recording interval, and then perform shooting. You can import the four recorded RAW images in the computer and combine them using Imaging Edge (Viewer). If you will not be using Imaging Edge (Remote) for shooting, use a Wireless Remote Commander (sold separately) or the [Self-timer] function in order to avoid camera shaking and subject blurring. Note If camera shaking and subject blurring occurs, the RAW images recorded with [Px. Shift Multi Shoot.] may not be combined properly. Even when 1