Sony ILCE-7RM3 Help Guide Printable PDF - Page 48
Notes on USB terminals, Notes on the cable protector
View all Sony ILCE-7RM3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
18 SLOT 1 (Memory card slot 1) . Supports SD cards only (compatible with UHS-I and UHS-II) 19 SLOT 2 (Memory card slot 2) . Supports SD cards (compatible with UHS-I) and Memory Stick PRO Duo media * For details on compatible accessories for the multi interface shoe and the Multi/Micro USB Terminal, visit the Sony website, or consult your Sony dealer or local authorized Sony service facility. Accessories for the Accessory Shoe can also be used. Operations with other manufactures' accessories are not guaranteed. Notes on USB terminals You can use either the USB Type-C terminal or the Multi/Micro USB Terminal for supplying power, charging the battery, and USB communications. However, you cannot conduct these operations with both terminals simultaneously. The battery charging time does not change according to the terminal you use. You can use accessories for the Multi/Micro USB Terminal, such as a remote commander (sold separately), while supplying power or performing PC Remote shooting using the USB Type-C terminal. Notes on the cable protector Use the cable protector to prevent a cable from being disconnected when shooting images with the cable connected. To attach the cable protector 1. Thread the cable through the cable protector. 2. Open both of the jack covers on the monitor side and insert the cable into one of the jacks. 3. Fit the hook of the cable protector into the slit under the Multi/Micro USB Terminal (A). Attach the cable protector as illustrated so that the upper jack cover fits into the notch in the cable protector (B), and then insert the claw of the cable protector into the slit next to the HDMI micro jack. 4. Push the attachment screw (C) in and turn it to secure the cable protector. 5. Insert the cable into the holding part and then secure the cable with the fixing dial (D). 12