Sony ILCE-7RM3 Help Guide Printable PDF - Page 436

On moisture condensation If the product is brought directly from a cold to a warm location, moisture may condense inside or outside the product. This moisture condensation may cause a malfunction of the product. To prevent moisture condensation when you bring the product directly from a cold to a warm location, first put it in a plastic bag and seal it to prevent air from entering. Wait for about an hour until the temperature of the product has reached the ambient temperature. If moisture condensation occurs, turn off the product and wait about an hour for the moisture to evaporate. Note that if you attempt to shoot with moisture remaining inside the lens, you will be unable to record clear images. On image data compatibility This product conforms with DCF (Design rule for Camera File system) universal standard established by JEITA (Japan Electronics and Information Technology Industries Association). Notes on playing movies on other devices XAVC S movies can be played back only on XAVC S-supported devices. On the monitor and viewfinder If you use the camera in a cold location, the image may have a trailing appearance. This is not a malfunction. Do not press against the monitor. The monitor may be discolored and that may cause a malfunction. If the monitor has drops of water or other liquids on it, wipe it with a soft cloth. If the monitor stays wet, the surface of the monitor may change or deteriorate. This may cause a malfunction. If the subject is too close, the image may show any dust or fingerprints on the lens. Wipe the lens with a soft cloth, etc. The camera uses magnetic parts including magnets. Do not bring objects affected by magnetism, including credit cards and floppy disks, close to the camera. 4-728-781-11(1) Copyright 2017 Sony Corporation 400