Sony KDF-37H1000 Operating Instructions - Page 10
Recommended Viewing Area, Screen, Projection Lamp, Cleaning the Screen Surface - lamp replacement
View all Sony KDF-37H1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Recommended Viewing Area Your viewing position may affect the picture quality. For the best picture quality, install your TV within the areas shown below. Model KDF-37H1000 Viewing distance min. 5.9 ft. (approx. 1.8 m) Horizontal Viewing Area Min. 5X.X9 ft. (approx. 1X.X8 m) 6655˚ ˚ 6655˚. Screen To minimize reflection, the screen surface has a special coating. Inappropriate cleaning methods could damage the screen surface. Special care is required. Cleaning the Screen Surface Dust and dirt on the screen can affect the picture quality. To dust off the screen use a soft cloth. Be sure to follow the cleaning instruction on page 5 for stubborn stains and dirt. Temporary Image Retention When high contrast non-moving images such as station logos and channel numbers are displayed for a long period of time, there may be some image retention on the screen. This is only a temporary condition. Turning off the power for a while or letting the TV run on another channel will eliminate the image retention. Vertical Viewing Area Min. 5X.X9 ft. (approx. 1X.X8 m) 30˚ 30˚ Projection Lamp Your TV uses a projection lamp as its light source. As with any lamp, it has a lifespan and needs to be replaced when the Lamp Indicator flashes or the screen becomes darker. Your TV also has a function to display a message, "Projection lamp is nearing end of life. Please replace the lamp." to let you know that the lamp has reached its expected lifespan. Note the following: s After turning on your TV, it may take a while (one minute or less) before the picture appears. s When the projection lamp wears out, the screen goes dark. Replace the lamp with a new Sony XL-2500 replacement lamp (not supplied). s After lamp is replaced, please set the Lamp Replacement option in the General settings (see page 38). "How to Replace the Lamp", see page 39. ~ • The light emitted from the lamp is quite bright when your TV is in use. To avoid eye discomfort or injury, do not look into the light housing when the power is on. 10