Sony KV-20M42 Operating Instructions - Page 16
Connecting Additional Equipment, and VIDEO OUT on your VCR to AUDIO/VIDEO IN on your TV.
View all Sony KV-20M42 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Operating Instructions Connecting Additional Equipment TV and VCR Rear of TV Video (yellow) Audio L (white) Audio R (red) 1 Connect the coaxial cable from your TV antenna or cable service to the IN jack on your VCR. 2 Connect a coaxial cable (not supplied) from the OUT jack on your VCR to the VHF/UHF IN jack on the TV. To watch video programs from your VCR, tune your TV to channel 3 or 4 (as set on the rear of your VCR). Optional Connection If your VCR is equipped with video outputs, you can get better picture quality by connecting Audio/Video cables (not supplied) from AUDIO and VIDEO OUT on your VCR to AUDIO/VIDEO IN on your TV. You can use the inputs. button to switch between the VHF/UHF and VIDEO 4
4
Operating Instructions
Connecting Additional Equipment
TV and VCR
1
Connect the coaxial cable from your TV antenna or cable service to
the IN jack on your VCR.
2
Connect a coaxial cable (not supplied) from the OUT jack on your
VCR to the VHF/UHF IN jack on the TV.
Optional Connection
If your VCR is equipped with video outputs, you can get better picture
quality by connecting Audio/Video cables (not supplied) from AUDIO
and VIDEO OUT on your VCR to AUDIO/VIDEO IN on your TV.
To watch video programs from your VCR, tune your TV to channel 3 or 4 (as
set on the rear of your VCR).
You can use the
button to switch between the VHF/UHF and VIDEO
inputs.
Rear of TV
Video (yellow)
Audio L (white)
Audio R (red)