Sony KV-27HS420 Operating Instructions - Page 23
Satellite Receiver and VCR
View all Sony KV-27HS420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
SETUP Setup SETUP Satellite Receiver and VCR Using S VIDEO jacks? See page 15. To connect a satellite receiver and VCR 1 Connect the CATV cable to the single (input) jack of the splitter. 2 Use a coaxial cable to connect one of the splitter's two output jacks to the TV's VHF/UHF jack. 3 Use a coaxial cable to connect the splitter's other output jack to the satellite receiver's VHF/UHF input jack. 4 Connect the satellite antenna cable to the satellite receiver's satellite input jack. 5 Use a coaxial cable to connect the satellite receiver's VHF/UHF output jack to the VCR's VHF/UHF input jack. 6 Use an A/V cable to connect the satellite receiver's A/V output jacks to the TV's A/V input jacks. 7 Use an A/V cable to connect the VCR's A/V output jacks to the TV's A/V input jacks. 8 Run the Auto Setup program, as described in "Setting Up the Channel List" on page 32. Notes on Using This Connection To Do This ... Do This ... Watch the satellite receiver Press TV/VIDEO repeatedly to select the satellite receiver input (VIDEO 3 in the illustration). Watch the VCR Press TV/VIDEO repeatedly to select the VCR input (VIDEO 1 in the illustration). Set up the TV remote control to operate the satellite receiver or VCR If you have a non-Sony VCR or satellite receiver, you must program the remote control. See "Programming the Remote Control" on pages 37-38. Activate the TV remote For the satellite receiver, press SAT/CABLE FUNCTION. For the VCR, press control to operate the satellite VCR/DVD FUNCTION. receiver or VCR Control satellite receiver and See "Operating a Satellite Receiver" on page 43 and "Operating a VCR" on VCR functions with the TV page 43. remote control Label video inputs to easily See the instructions for setting up Video Labels on pages 58-59. identify equipment connected to the TV SETUP SETUP SETUP 22