Sony MEX-M71BT Operating Instructions - Page 15
Selecting channels for SiriusXM, To select channels from categories, To store channels
View all Sony MEX-M71BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
As part of the activation process, the SiriusXM satellites will send an activation message to your tuner. When your radio detects that the tuner has received the activation message, your radio will display: [SUBSCRIPTION UPDATED - PRESS ENT TO CONTINUE]. Once subscribed, you can tune to channels in your subscription plan. Notes • The activation process usually takes 10 to 15 minutes, but may take up to an hour. • Your radio will need to be turned on and receiving the SiriusXM signal to receive the activation message. Selecting channels for SiriusXM 1 Press (browse). 2 Rotate the control dial to select [CHANNEL], then press it. 3 Rotate the control dial to select the desired channel, then press it. To select channels from categories 1 Press (browse). 2 Rotate the control dial to select [CATEGORY], then press it. 3 Rotate the control dial to select the desired category, then press it. The channel list appears. 4 Rotate the control dial to select the desired channel, then press it. To store channels 1 While receiving the channel that you want to store, press and hold a number button (1 to 6) until [MEM] appears. To receive the stored channel, press MODE to select [SX1], [SX2] or [SX3], then press a number button (1 to 6). To set a parental control The parental control feature allows you to limit access to SiriusXM channels with mature content. When enabled, the parental control feature requires you to enter a passcode to tune to the locked channels. Information on setting up the passcode and locking channels can be found below. 1 Press MENU and rotate the control dial. 2 Select [GENERAL] [SXM PARENTAL] [LOCK SELECT] [LOCK-ON]. 3 Enter the passcode by rotating the control dial on the unit or pressing / on the remote commander. To move the entry position, press / (SEEK -/+) on the unit or / on the remote commander. The initial passcode is [0000]. 4 After entering the passcode, press ENTER. To unlock the channels, select [LOCK-OFF]. To change the passcode 1 Press MENU and rotate the control dial. 2 Select [GENERAL] [SXM PARENTAL] [CODE EDIT]. 3 Enter the current passcode on the current passcode input display, then press ENTER. The initial passcode is [0000]. 4 Enter your new 4-digit passcode on the new passcode input display, then press ENTER. To change display items Press DSPL to change as follows: Channel Number (Default) Channel Name Artist Name Song Title Content Info Category Name Clock 15GB