Sony MHC-GX25 Operating Instructions - Page 22
Display, Turning off the display, — Power Saving Mode
View all Sony MHC-GX25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Other operations To Check the setting Change the setting Cancel the timer Do this 1 Press CLOCK/TIMER SELECT. 2 Press . or > repeatedly until "REC SELECT" appears, then press ENTER. Start over from step 1. 1 Press CLOCK/TIMER SELECT. 2 Press . or > repeatedly until "TIMER OFF" appears, then press ENTER. Notes • You cannot activate the Daily Timer and recording timer at the same time. • If you use the recording timer, the Daily Timer and the Sleep Timer at the same time, the Sleep Timer has priority. • If the system is on at the preset time, the timerrecording will not be activated. • The volume is reduced to minimum during recording. Display Turning off the display - Power Saving Mode The demonstration display (display window and buttons lighting and flashing even when the system power is off) and the clock display can be turned off to minimize the amount of power consumed during standby (Power Saving Mode). Press DISPLAY repeatedly while the system is off until the demonstration display or the clock display disappears. To cancel Power Saving Mode Press DISPLAY while the system is off. Each time you press the button, the display switches cyclically as follows: Demonstration display t Clock display* t No display (Power Saving Mode) * The clock is displayed only if you set the clock. Note You cannot perform the following operations in Power Saving Mode. - setting the clock - changing the AM tuning interval (except for European, Russian, Middle Eastern and Philippine models) - turning on the system by pressing the function buttons Tip The timer continues to operate in Power Saving Mode. 22GB