Sony MHC-GX25 Operating Instructions - Page 7

Getting Started 3 Connect the FM and AM antennas. Set up the AM loop antenna, then connect it. AM loop antenna 5 Connect the power cord to a wall outlet. The demonstration appears in the display. When you press ?/1, the system turns on and the demonstration automatically ends. If the plug does not fit the wall socket, detach the supplied plug adaptor (only for models equipped with an adaptor). Inserting two R6 (size AA) batteries into the remote e E E e Extend the FM lead antenna horizontally Note Keep the antennas away from the speaker cords. 4 For models with a voltage selector, set VOLTAGE SELECTOR to the local power line voltage. Refer to the print on your system's VOLTAGE SELECTOR for available settings. Note If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage and corrosion. Tip With normal use, the batteries should last for about six months. When the remote no longer operates the system, replace both batteries with new ones. Attaching the speaker pads Attach the supplied front speaker pads to the bottom of the speakers to stabilize the speakers and prevent them from slipping. Front speaker (Left (4)/Right (4)) for MHCGX45/GX25/RG440S/RG310 and MHCRG220 * Saudi Arabian model: 120 - 127 V continued 7GB