Sony MHC-RG20 Operating Instructions - Page 11

CD To Switch to CD function from another source Remove a CD Exchange other CDs while playing Play repeatedly (Repeat Play) Do this Press DISC 1 - 3 (Automatic Source Selection). However, if a CD is used in a program, play does not start even if you press CD 1 - 3. Press Z OPEN/CLOSE. Press DISC SKIP EX-CHANGE. Press REPEAT on the remote during play until "REP" or "REP 1" appears. REP*: For all the tracks on the CD up to five times. REP 1**: For a single track only. To cancel playing repeatedly, press REPEAT until "REP" or "REP 1" disappears. * You cannot select "REP" and "ALL DISCS SHUF" at the same time. ** When you select "REP 1", that track is repeated endlessly until "REP 1" is canceled. Note The play mode cannot be changed while playing a disc. To change the play mode, press x first to stop play. Programing CD tracks - Program Play You can make a program of up to 32 tracks from all the CDs in the order you want to play them. 1 Press CD, then place a CD. 2 Press PLAY MODE on the remote repeatedly until "PGM" appears in the display. 3 Press one of DISC 1 - 3 to select a CD. To program all the tracks on a CD at once, proceed to step 5 with "AL" displayed. 4 Press . or > until the desired track appears in the display. Disc tray number Total playing time (including selected track) Track number 5 Press ENTER on the remote. The track is programed. The program step number appears, followed by the total playing time. 6 Program additional discs or tracks. To program Other discs Other tracks on the same disc Other tracks on other discs Repeat steps 3 and 5 4 and 5 3 to 5 7 Press H (or N on the remote). Other Operations To Do this Cancel Program Play Press PLAY MODE on the remote repeatedly until "PGM" and "SHUF" disappear. Clear a track from Press CLEAR on the remote in the end stop mode. Clear the entire program Press x once in stop mode or twice during play. continued 11