Sony MHC-RG20 Operating Instructions - Page 12

Programing CD tracks (continued) Tips • The program you made remains after Program Play finishes. To play the same program again, press CD, then press H (or N on the remote appears when the total CD program time exceeds 100 minutes, or when you select a CD track whose number is 21 or over. Using the CD display You can check the remaining time of the current track or the entire CD. Press DISPLAY repeatedly. During normal play Playing time of the current track t Remaining time of the current track t Remaining time of current CD t Clock display (for eight seconds) t Effect status In stop mode During Program Play mode when there is a program: The last track number of the program and the total playing time t Total number of programed tracks (for eight seconds) t Clock display (for eight seconds) t Effect status Tuner Presetting radio stations You can preset up to 20 stations for FM and 10 stations for AM. 1 Press TUNER/BAND repeatedly to select "FM" or "AM". 2 Press and hold m or M (or TUNING - or + on the remote) until the frequency indication starts to change, then release it. Scanning stops automatically when the system tunes in a station. 3 Press TUNER MEMORY on the remote. A preset number appears in the display. The stations are stored from preset number 1. Preset number 4 Press ENTER on the remote. "COMPLETE" appears. The station is stored. 5 Repeat steps 1 to 4 to store other stations. To tune in a station with a weak signal Press m or M (or TUNING - or + on the remote) repeatedly in step 2 to tune in the station manually. 12