Sony MHC-RG20 Operating Instructions - Page 23
Speakers, CD Player, Tape Deck, Tuner, The system is reset to the factory settings. All
View all Sony MHC-RG20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Additional Information Speakers Sound comes from one channel or unbalanced left and right volume. • Check the speaker connection and speaker placement. Sound lacks bass. • Check that the speaker's + and - jacks are connected correctly. CD Player The CD tray does not close. • The CD is not placed properly. The CD will not play. • The CD is not lying flat in the disc tray. • The CD is dirty. • The CD is loaded label side down. • There is moisture on the CD. Play does not start from the first track. • The player is in program or shuffle mode. Press PLAY MODE repeatedly until "PGM" or "SHUF" disappears. Tape Deck The tape does not record. • No tape in the cassette holder. • The tab has been removed from the cassette (see "To save a tape permanently" on page 21). • The tape has reeled to the end. The tape does not record nor play or there is a decrease in sound level. • The heads are dirty (see "Cleaning the tape heads" on page 21). • The record/playback heads are magnetized (see "Demagnetizing the tape heads" on page 21). The tape does not erase completely. • The record/playback heads are magnetized (see "Demagnetizing the tape heads" on page 21). There is excessive wow or flutter, or the sound drops out. • The capstans or pinch rollers are dirty (see "Cleaning the tape heads" on page 21). Noise increases or the high frequencies are erased. • The record/playback heads are magnetized (see "Demagnetizing the tape heads" on page 21). Tuner There is severe hum or noise ("TUNED" or "STEREO" flashes in the display). • Adjust the antenna. • The signal strength is too weak. Connect the external antenna. A stereo FM program cannot be received in stereo. • Press STEREO/MONO repeatedly until "MONO" disappears. If other troubles not described above occur, reset the system as follows: 1 Unplug the power cord. 2 Plug the power cord back in. 3 Press x, DISPLAY, and ?/1 at the same time. 4 Press ?/1 to turn on the system. The system is reset to the factory settings. All the settings you made are cleared. 23