Sony MZ-N420DPS Operating Instructions - Page 29
Troubleshooting and explanations, Troubles and solutions, While playing
View all Sony MZ-N420DPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Troubleshooting and explanations Troubles and solutions If you find any troubles operating the player, follow the steps below. 1 Check this section, "Troubles and solutions" (page 29). 2 If you cannot solve the problem after you made checks, consult your nearest Sony dealer. While playing Symptom An MD is not played normally. An MD is not played from the first track. The digital sound preset function does not work. Playback sound skips. Sound has a lot of static. Noise is momentarily heard. Volume cannot be turned up. Cause/Remedy • Repeat play is selected. , Use MENU on the player to change back to the normal play (page 18). • Playback mode is changed. , Use MENU on the player to change back to the normal play (page 18). • Disc playing stopped before it came to the last track. , Press NX for 2 seconds or more to start playing. • Group play mode is selected. , Use MENU on the player to change back to the normal play (page 18), and then press NX for 2 seconds or more to start playing. • The digital sound preset is off. , Select "SOUND1" or "SOUND2" (page 19). • The player is placed where it receives continuous vibration. , Put the player on a stable place. • A very short track may cause sound to skip. , Try not to create a track under one second long. • Strong magnetism from a television or such device is interfering with operation. , Move the player away from the source of strong magnetism. • The sound was recorded in LP4 stereo mode. , Because of the nature of the compression method used in LP4 mode, noise may be output on very rare occasions during playback of sound recorded in this mode. • AVLS is on. , Release AVLS settings (page 25). 29