Sony PCV-E201 Reference Manual - Page 32
Removing the Front Panel, CD-ROM drive PCV-E201 or CD/DVD-ROM drive PCV-E203
View all Sony PCV-E201 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
24 VAIO MicroTower System Reference Removing the Front Panel You must remove the front panel to install system memory, which requires pulling the diskette drive out about two inches. 1 Insert a straightened paper clip into the emergency-eject hole on the CD-ROM drive (PCV-E201) or CD/DVD-ROM drive (PCV-E203/ PCV-E205) to open the tray. 2 Pull the tray out to its normal opened position. 3 Lift up on the front tray cover to remove it. 4 Remove the bottom panel (see "Removing the Bottom Panel" on page 23) to access the two plastic tabs on the bottom of the front panel. 5 Push down and out on the two plastic tabs from inside the bottom of the chassis to release the bottom end of the front panel. Front tray cover Front panel Tab Push tabs out from inside chassis 6 Pull out the top end of the front panel to remove it. KY0055.VSD