Sony PCV-E201 Reference Manual - Page 43

fully seated., Reinstall any add-in cards and other components that were removed.

Get Sony PCV-E201 - Vaio Desktop Computer PDF manuals and user guides View all Sony PCV-E201 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

Removing, Installing and Reinstalling Components 35 4 Align the module over the appropriate socket, noting the location of pin 1 on the module and pin 1 on the socket. Pin 1 side Press down here Handles Bank 0 Bank 1 Memory module (DIMM) 1 Indicates pin 1 OM04586.VSD 5 Carefully but firmly insert the edge of the module into the socket. 6 Press down firmly and evenly at both corners until the module is fully seated.  When the module is fully seated, the handles on each side are straight up and locked into the slot on each side of the module. If the handles are not totally straight upright, continue to press down on each side of the module until the handles lock into place. 7 Reinstall any add-in cards and other components that were removed. 8 Reinstall the bottom panel (see "Reinstalling the Bottom Panel" on page 26).

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
Removing, Installing and Reinstalling Components
35
4
Align the module over the appropriate socket, noting the location of
pin 1 on the module and pin 1 on the socket.
5
Carefully but firmly insert the edge of the module into the socket.
6
Press down firmly and evenly at both corners until the module is
fully seated.
7
Reinstall any add-in cards and other components that were removed.
8
Reinstall the bottom panel (see
“Reinstalling the Bottom Panel”
on
page 26).
When the module is fully seated, the handles on each side are straight up and
locked into the slot on each side of the module. If the handles are not totally
straight upright, continue to press down on each side of the module until the
handles lock into place.
Bank 1
Bank 0
Pin 1 side
1
Indicates pin 1
Memory module (DIMM)
OM04586.VSD
Handles
Press down
here