Sony PCV-E201 Reference Manual - Page 85
Large Disk Access Mode, Base I/O address
View all Sony PCV-E201 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
BIOS Setup Options 77 I/O Device Configuration Serial port A: [Auto] Disabled Enabled Base I/O address*: [3F8] 2F8 3E8 2E8 Interrupt*: [IRQ 4] IRQ 3 Parallel port: [Auto] Disabled Enabled Mode†: [ECP] Output only Bi-directional EPP Base I/O address‡: [378] 278 3BC Interrupt‡: [IRQ 7] IRQ 5 DMA channel**: [DMA 3] DMA 1 Floppy disk controller: [Enabled] Auto Disabled Base I/O address: [Primary] Secondary Large Disk Access Mode: [DOS] Other Local Bus IDE adapter: [Both] Disabled Primary Secondary Sound: [Enabled] Disabled * This option appears only if the port is set to Enabled. † This option appears only if the port is set to Auto or Enabled. ‡ This option appears only if the port is set to Enabled and Mode is not set to EPP. ** This option appears only if the port is set to Enabled and Mode is set to ECP.