Sony PCV-R556DS Reference Manual - Page 49

Replacing the Power Supply, Replacing the Cover

Get Sony PCV-R556DS - Vaio Digital Studio Desktop Computer PDF manuals and user guides View all Sony PCV-R556DS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 49 highlights

Removing, Installing, and Replacing Components 35 7 Align the module over the appropriate socket, noting the location of pin 1 on the module and pin 1 on the socket. Press down here Handles Pin 1 side DIMM2 DIMM1 Memory module (DIMM) 1 8 Carefully but firmly insert the edge of the module into the socket. 9 Press down firmly and evenly at both corners until the module is fully seated. ✍ When the module is fully seated, the handles on each side are straight up and locked into the slot on each side of the module. If the handles are not totally straight upright, continue to press down on each side of the module until the handles lock into place. 10 Replace the power supply (see "Replacing the Power Supply" on page 48). 11 Replace the cover (see "Replacing the Cover" on page 26).

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
Removing, Installing, and Replacing Components
35
7
Align the module over the appropriate socket, noting the location of
pin 1 on the module and pin 1 on the socket.
8
Carefully but firmly insert the edge of the module into the socket.
9
Press down firmly and evenly at both corners until the module is
fully seated.
10
Replace the power supply (see
“
Replacing the Power Supply
”
on
page 48).
11
Replace the cover (see
“
Replacing the Cover
”
on page 26).
When the module is fully seated, the handles on each side are straight up and
locked into the slot on each side of the module. If the handles are not totally
straight upright, continue to press down on each side of the module until the
handles lock into place.
DIMM1
DIMM2
Pin 1 side
1
Memory module (DIMM)
Handles
Press down
here