Sony PCV-R556DS Reference Manual - Page 56
Secure the drive to the drive holder using the two holes on each side, overtighten the screws.
View all Sony PCV-R556DS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
42 VAIO Digital Studio Reference Manual 5 Slide the drive holder forward (B), and then out. A A A A Disk drive holder B KY0081.VSD 6 Place the drive holder on top of the power supply. 7 Slide the new drive into the drive holder and align the holes on each side of the drive holder. Align holes KY0083.VSD 8 Secure the drive to the drive holder using the two holes on each side of the drive holder (screws are provided with the new drive). Do not overtighten the screws. 9 Connect the second drive connector to the new drive (see next diagram).
VAIO Digital Studio Reference Manual
42
5
Slide the drive holder forward (B), and then out.
6
Place the drive holder on top of the power supply.
7
Slide the new drive into the drive holder and align the holes on each
side of the drive holder.
8
Secure the drive to the drive holder using the two holes on each side
of the drive holder (screws are provided with the new drive). Do not
overtighten the screws.
9
Connect the second drive connector to the new drive (see next
diagram).
KY0081.VSD
Disk drive holder
A
A
A
A
B
KY0083.VSD
Align
holes