Sony PEG-NR70 Add-on Application Guide - Page 173
Using the CLIÉ handheld as a remote control, Remote-controlling a device
UPC - 027242603004
View all Sony PEG-NR70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 173 highlights
Using the CLIÉ handheld as a remote control You can operate a remote-controlled device on the device's control screen. For those operations you have assigned to the Jog Dial™ navigator or to the application buttons, see page 174. Notes • Be sure to point the IR port of your CLIÉ handheld toward the device that you wish to remote-control. • The reach of the remote-control signal is approximately 5 meters, but it may vary depending on the receiving device or on the environment. • Some buttons on the CLIÉ Remote Commander application's control screen would not work if the remote-controlled device is not equipped with that function. Note also that some functions may not work depending on its model. Remote-controlling a device Operating a device from the control screen 1 On the Application Launcher screen, rotate the Jog Dial™ navigator to select CLIÉ RMC and press the Jog Dial navigator. Or, tap the CLIÉ RMC icon on the Application Launcher screen. The CLIÉ Remote Commander application starts and control screen for the last used device appears. Note If the setting for the last used device has been deleted, the Select Control screen appears. 2 Perform either of the following to switch to the control screen of the device you are about to remote-control. • For devices assigned to a quick-start button: Tap the quick-start button to which it is assigned. • For devices unassigned to a quick-start button: Tap Select, then tap to select the name of the remote control setting from the list. The control screen for the selected device appears. 3 Tap the on-screen buttons to remote-control the device. 173 Chapter 8 CLIÉ Remote Commander