Sony PEG-TJ37 CLIE Handbook - Page 120
Performing the IR HotSync, operation, To restore the local HotSync settings, Tap [Local].
UPC - 027242641525
View all Sony PEG-TJ37 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Performing the IR HotSync® operation Performing the IR HotSync® operation You can perform the IR HotSync® operation when you have prepared your computer settings, CLIÉ handheld settings, and Conduit Setup. 1 Rotate the Jog Dial™ navigator to select (HotSync) on the CLIE Launcher and press the Jog Dial™ navigator. The HotSync screen is displayed. Tip You can also tap 2 Tap [Local]. (HotSync) to display the HotSync screen. 3 Tap V, and select [IR to a PC/Handheld]. 4 Point the IR port of your CLIÉ handheld directly to the IR port of the computer. For best results, your computer and your CLIÉ handheld should be 4 to 8 inches (approximately 10 to 20 centimeters) apart, and the path between your CLIÉ handheld and the computer must be clear of obstacles. 5 Tap (HotSync). The HotSync® operation starts. A message will be displayed when the HotSync® operation is complete. To restore the local HotSync settings When performing the local HotSync® operation, restore the local HotSync settings with a USB cable. 1 Connect your CLIÉ handheld to your computer with a USB cable. 2 Click (HotSync) in the Windows task tray (Notification area) at the bottom right of the computer window, and select [Local USB] from the shortcut menu. Exchanging and updating files/data using the HotSync® operation (Other HotSync® operations) Continued on next page 120