Sony PEG-TJ37 CLIE Handbook - Page 85
Searching and setting a wireless LAN access point manually
UPC - 027242641525
View all Sony PEG-TJ37 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Setting the Network preferences for a wireless LAN (for PEG-TJ37 only) Searching and setting a wireless LAN access point manually 1 Tap V at the top right corner of the Preferences screen, and select [Network]. 2 Tap [V Service:], and select [Wireless LAN]. 3 Tap [Details...]. The Wireless LAN Setup screen is displayed. 4 Tap [Scan]. The Connection Progress dialog box is displayed until a wireless LAN access point is found at least. When wireless LAN access point(s) is(are) found, it(they) is(are) displayed on the ScanResult screen. Tip The existing wireless LAN access point may be not detected via Scan operation because of an electric wave condition or timing. Moreover, profile may be set to be hidden at the wireless LAN access point side. In this case, your CLIÉ handheld also can not detect it. 5 Tap one from the found wireless LAN access points, then tap [Select]. The Wireless LAN Setup screen is displayed. 6 Tap [V None] under [WEP :], then select the type of WEP key. The WEP KEY Input dialog box is displayed. 7 Enter the WEP Key, then tap [OK]. The WEP KEY Input dialog box is closed. 8 Tap [OK]. The Wireless LAN Setup screen which added new SSID setting for the selected wireless LAN access point under [Profile Name :] is displayed. 9 Tap [OK]. The Wireless LAN Setup screen is closed, and the Preferences screen for [Network] is displayed. Customizing your CLIÉ™ handheld (Preferences) 85