Sony PEG-TJ37 CLIE Handbook - Page 123
Performing the HotSync, operation viamodem, Serial port, Speed, Modem, Setup string, HotSync
UPC - 027242641525
View all Sony PEG-TJ37 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Performing the HotSync® operation via a modem 5 Adjust the following settings as needed. • Serial port: Specifies the port for the modem. If you are not sure of the port settings, check [Modem Properties] ([Phone and Modem Options] for Windows 2000 Professional/XP) from [Control Panel]. • Speed: Determines the speed at which files/data are transferred. Try the rate, [As Fast As Possible] first, and adjust downward if you have any problems. • Modem: Specifies the modem type or manufacturer. If you are not sure of your modem type or if you cannot find your modem type in the list, select [Hayes Basic]. • Setup string: Identifies the setup string for your modem automatically if you specify the modem type or manufacturer. If it does not work properly, refer to the manual of your modem. 6 Click [OK]. Preparing your CLIÉ handheld Follow the steps below to set up your CLIÉ handheld for the modem HotSync® operation. 1 Rotate the Jog Dial™ navigator to select (HotSync) on the CLIE Launcher and press the Jog Dial™ navigator. The HotSync screen is displayed. Tip You can also tap (HotSync) to display the HotSync screen. 2 Tap [Modem]. Exchanging and updating files/data using the HotSync® 123 operation (Other HotSync® operations)