Sony PMW320K Product Manual (PMW320 Operating Instruction) - Page 55
To switch between Speed mode and, Angle mode, To set the shutter mode and standard, mode shutter speed
View all Sony PMW320K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Chapter 3 Adjustments and Settings To switch between Speed mode and Angle mode 1 Select OPEARTION >Shutter Select >Shutter Select in the setup menu (see page 108). 2 Turn the MENU knob to select Second or Degree, and then press the knob. To set the shutter mode and standardmode shutter speed Once the shutter speed is selected, it is retained even when the camcorder power is turned off. 1 Push the SHUTTER selector from ON to SELECT. The current shutter setting indication appears for about three seconds. 2 Before the shutter setting indication disappears, push the SHUTTER selector down to SELECT again and repeat this until the desired mode or speed appears. When all modes and speeds are displayed, the display changes in the following order. Speed Mode (with system frequency 59.94i) To set the shutter speed in ECS or SLS mode 1 Set the shutter mode to ECS or SLS (see the previous item). 2 Turn the MENU knob to select the desired frequency or number of frames. SLS Mode ECS Mode Note Depending on the frame rate setting (see page 78), some shutter speeds cannot be selected in Slow & Quick Motion mode. These speeds are replaced by the slowest selectable shutter speed. Example: If you perform Slow & Quick Motion shooting when setting the frame rate to 60 and the video format to HQ1280/29.97P The shutter speed is indicated as follows. When Slow & Quick Motion mode is off 1/40t1/50t1/60t1/100t... When Slow & Quick Motion mode is on 1/60t1/60t1/60t1/100t... Setting the Electronic Shutter 55