Sony SEP-30BT Operating Instructions - Page 28

Others, Bluetooth communication

Page 28 highlights

Troubleshooting (continued) Symptom The computer does not recognize the player. Cause/Remedy  The USB cable is not connected to the USB port of the computer securely.  Disconnect the USB cable, and then connect it again.  Try other USB ports of the computer.  There is no battery in the player.  Insert the battery. Bluetooth communication Symptom The sound of the connected Bluetooth device is not heard. Noise is generated. Pairing cannot be done. Cause/Remedy  The sound is silenced on the paired Bluetooth device.  Turn up the volume on the paired Bluetooth device.  The volume may be set to the minimum.  Adjust the volume ( page 30).  Noise may be generated depending on the environment in which the connection with the Bluetooth device was established.  Try establishing the connection with the Bluetooth device again.  The player is too far from the Bluetooth device to be paired.  Place the player and the Bluetooth device closer and perform the pairing operation.  Make sure that the paired Bluetooth device supports the A2DP profile. 54 Others Symptom The sound is heard intermittently. A connection cannot be established. Cause/Remedy  There are obstacles (metal objects, persons, walls, etc.) between the player and the paired Bluetooth device.  Avoid or remove the obstacles.  If there is equipment that generates electromagnetic radiation, such as a wireless LAN, other Bluetooth device, or a microwave oven nearby, move them away.  If Bluetooth devices other than the player are connected to the paired Bluetooth device, the music played on the Bluetooth device may sound intermittently through the speakers of the player. If this happens, disconnect the other Bluetooth devices from the paired Bluetooth device.  The Bluetooth device to be connected does not support the SCMS-T system.  On the [Tools] menu of Rolly Choreographer, select [Rolly Settings] - [Bluetooth Communication] - [Copyright Protection] - [Copyright Protection] - [Disable SCMS-T method content protection]. Others Symptom The arm was detached. The wheel was detached Cause/Remedy  Attach the arm as described on page 11.  Attach the wheel as described on page 11. 55

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

²±
²²
Symptom
Cause/Remedy
The sound is heard intermittently.
There are obstacles (metal objects, persons, walls, etc.)
between the player and the paired Bluetooth device.
Avoid or remove the obstacles.
If there is equipment that generates electromagnetic
radiation, such as a wireless LAN, other Bluetooth device,
or a microwave oven nearby, move them away.
If Bluetooth devices other than the player are connected
to the paired Bluetooth device, the music played on the
Bluetooth device may sound intermittently through the
speakers of the player. If this happens, disconnect the
other Bluetooth devices from the paired Bluetooth device.
A connection cannot be established.
The Bluetooth device to be connected does not support
the SCMS-T system.
On the [Tools] menu of Rolly Choreographer, select
[Rolly Settings] - [Bluetooth Communication]
- [Copyright Protection] - [Copyright Protection]
- [Disable SCMS-T method content protection].
Others
Symptom
Cause/Remedy
The arm was detached.
Attach the arm as described on page 11.
The wheel was detached
Attach the wheel as described on page 11.
Others
Symptom
Cause/Remedy
The computer does not recognize
the player.
The USB cable is not connected to the USB port of the
computer securely.
Disconnect the USB cable, and then connect it again.
Try other USB ports of the computer.
There is no battery in the player.
Insert the battery.
Bluetooth communication
Symptom
Cause/Remedy
The sound of the connected
Bluetooth device is not heard.
The sound is silenced on the paired Bluetooth device.
Turn up the volume on the paired Bluetooth device.
The volume may be set to the minimum.
Adjust the volume (
page 30).
Noise is generated.
Noise may be generated depending on the environment
in which the connection with the Bluetooth device was
established.
Try establishing the connection with the Bluetooth
device again.
Pairing cannot be done.
The player is too far from the Bluetooth device to be
paired.
Place the player and the Bluetooth device closer and
perform the pairing operation.
Make sure that the paired Bluetooth device supports the
A2DP profile.
Troubleshooting
(continued)