Sony SEP-30BT Operating Instructions - Page 8

Getting Started Charging the Battery (continued) Notes  Set the Power switch to OFF before connecting the player to a computer.  You cannot operate the player when it is connected to a computer.  Make sure that you disconnect the player before you turn off or restart your computer. Otherwise, the player may not operate correctly.  Connect the player and the computer directly, not via a USB hub.  Charge the battery at a temperature ranging from 10 °C (50 °F) to 30 °C (86 °F). Charging may not be done efficiently outside of this temperature range.  In the case of a battery which has been fully discharged or has not been used for a long time, the Play-button indicator may not light up immediately after you start charging the battery. The Play-button indicator will light up in orange after a few minutes and charging will start.  When you do not intend to use the player for a long time, remove the battery from the player. When the battery is removed, the clock setting and wake-up timer setting will be reset to their default settings. Checking the remaining battery power Set the Power switch to ON or , and hold the player as illustrated on the right. The Play-button indicator indicates the remaining battery by lighting or flashing. You cannot check the remaining battery power when the player is in power-saving mode. Play-button indicator Remaining battery power Lights up in orange for 3 seconds Sufficient Flashes in orange slowly for 3 seconds Not much left Flashes in orange rapidly for 3 seconds Consumed* When the battery is fully discharged, the Play-button indicator flashes rapidly in orange for 5 seconds. Then, the player enters power-saving mode automatically. * When the battery is fairly consumed, you cannot play music accompanied by motion. 14 continued  15