Sony SLV-N51 Operating Instructions - Page 12
Hookup 1 (Plug and Play), Antenna hookup, Use this hookup if you, re using
View all Sony SLV-N51 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Hookup 1 (Plug and Play) Antenna hookup Make the following connections if you're using an antenna (if you don't have cable TV). A Use this hookup if you're using: • VHF/UHF antenna (you get channels 2-13 and channels 14 and higher) • UHF-only antenna (you get channels 14 and higher) • Separate VHF and UHF antennas VCR IN OUT Rear of TV VHF/UHF A Match the type of connector on your or VHF TV: A, B, or C. B UHF or VHF C UHF B Use this hookup if you're using a VHF-only antenna (you get channels 2-13 only) VCR IN OUT Rear of TV VHF/UHF A Match the type of connector on your or TV: A, B, or C. VHF B For connector types B and C, no UHF or UHF connection is VHF required. C UHF If you cannot connect your antenna cable to the VCR directly If your antenna cable is a flat cable (300-ohm twin lead cable), attach an external antenna connector (not supplied) so you can connect the cable to the RF IN connector. If you have separate cables for VHF and UHF antennas, you should use a U/V band mixer (not supplied). For details, see page 51. 12 Hookups