Sony SLV-N51 Operating Instructions - Page 50
General setup information, Setting the RF unit
View all Sony SLV-N51 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Additional Information General setup information Setting the RF unit When connecting the VCR to the TV using only the antenna cable, you must set the CH switch on the rear of the VCR so that the TV can receive the correct signal from the VCR. TV CH 34 123 456 789 0 TV/VIDEO ?/1 POWER CHANNEL +/- 1 Set the CH switch on the rear of the VCR to 3 or 4, whichever channel is not used in your area. If both are used, set the switch to either channel. 2 Press ?/1 POWER to turn on the VCR. 3 Press TV/VIDEO to turn on the VCR indicator in the VCR's display window. 4 Press CHANNEL +/- to display a channel number in the display window. Select an active channel number in your area. 5 Turn on your TV and set it to the channel you selected in step 1 (channel 3 or 4). The channel you selected in step 4 appears on the TV screen. If the channels change when you press CHANNEL +/-, you have made the correct setting. Whenever you use the VCR, set the TV to the channel selected in step 1. 50 General setup information