Sony SS-CNP700 Operating Instructions - Page 13
Installing the speakers on the, Fasten the screws to the wall.
View all Sony SS-CNP700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Getting Started Installing the speakers on the wall You can install your front and surround speakers on the wall. 1 Prepare screws (not supplied) that are suitable for the hole on the back of each speaker as shown in the illustrations below. more than 5/32 inch more than 1 inch 3/16 inch 13/32 inch Hole on the back of the speaker 2 Fasten the screws to the wall. The screws should protrude to 7/32 to 9/32 inch. 3 Hang the speakers on the screws. Hole on the back of the speaker 3/16 inch 13/32 inch Notes • Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach the screws securely to a beam and fasten them to the wall. Install the speakers on a vertical and flat wall where reinforcement is applied. • Contact a screw shop or installer regarding the wall material or screws to be used. • Sony is not responsible for accident or damage caused by improper installation, insufficient wall strength or improper screw installation, natural calamity, etc. 7/32 to 9/32 inch 13US