Sony STR-DA4600ES Operating Instructions (Large File - 17.22 MB) - Page 144
Setting remote control codes that are not stored in Quick Click, To use a command that has
View all Sony STR-DA4600ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
Setting remote control codes that are not stored in Quick Click Remote sensor About 5 cm - 10 cm (2" - 4") QUICK CLICK V/v/B/b, MENU 1 Select " Settings" from the menu, then press or b. 2 Select "Quick Click," then press . 3 Select "Source Component," or "Common Component," then press . 4 Select the component you want, then press . 5 Select "Learn Mode," then press . 6 Select the code number you want to store as the new command, then press . 7 Keep pressing the corresponding button on the remote of the component to be programmed while pointing the remote toward the receiver's remote sensor until "Complete" is displayed on the TV screen. "Test" is selected automatically after few seconds when the registration of a new code is completed. 8 Press . The operation test of the programmed code is started. Proceed to step 9 if you will not perform the operation test. 9 Select "Finish," then press . Note The display window is turned off while the receiver is registering the new code. To use a command that has been learned 1 Select " Input" from the menu, then press or b. 2 Select the component you want, then press . 3 Press QUICK CLICK. 4 Select the button on the on-screen remote used to learn that function, then press . 144GB