Home » Sony Manuals » Audio Components » Sony STR-DA4600ES » Manual Viewer

Sony STR-DA4600ES Operating Instructions (Large File - 17.22 MB) - Page 45

Press SPEAKERS A/B/A+B/OFF, Sur Back Assign, then press

Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

Getting Started Setting the surround back speakers You can switch the usage of the speaker(s) connected to the SURROUND BACK/ FRONT HIGH/ZONE 2 terminals in accordance with the intended use. Be sure to set "Sur Back Assign" before you perform auto calibration. 1 Press MENU. The menu is displayed on the TV screen. 2 Press V/v repeatedly to select " Settings," then press or b. The Settings menu list appears on the TV screen. 3 Press V/v repeatedly to select "Speaker," then press . 4 Press V/v repeatedly to select "Sur Back Assign," then press . 5 Press V/v repeatedly to select the parameter you want, then press . Parameter Explanation OFF The SURROUND BACK/ FRONT HIGH/ZONE 2 terminals can be used for a surround back speakers or front high speakers connection. BI-AMP The SURROUND BACK/ FRONT HIGH/ZONE 2 terminals can also be used for a bi-amplifier connection (page 107). ZONE2 The SURROUND BACK/ FRONT HIGH/ZONE 2 terminals can also be used for a zone 2 connection (page 90). 6 Press RETURN/EXIT O. Note This setting is available if the speaker pattern is set so that there are no surround back speakers and no front high speakers. Selecting the front speakers You can select the front speakers you want to drive. SPEAKERS (A/B/A+B/OFF) Press SPEAKERS (A/B/A+B/OFF) repeatedly to select the front speaker system you want to drive. You can confirm which set of terminals (A or B) are selected by checking the indicators in the display window. Indicators Selected speakers SP A The speakers connected to the FRONT A terminals. SP B The speakers connected to the FRONT B terminals. SP AB The speakers connected to both the FRONT A and FRONT B terminals (parallel connection). "SPK OFF" appears in the display window. No audio signals are output from any speaker terminals, or the PRE OUT jacks. Note This setting is not available when headphones are connected. 45GB

Section	Page
Table of Contents	6
Description and location of parts	8
Getting Started	19
Checking the connection appropriate for your components	19
1: Installing speakers	20
2: Connecting the monitor	24
3: Connecting the video components	25
4: Connecting the audio components	34
5: Connecting the IR Blaster	38
6: Connecting the antennas (aerials)	39
7: Connecting to the network	40
8: Preparing the receiver and the remote	42
9: Setting the speakers	43
10: Calibrating the appropriate speaker settings automatically (Auto Calibration)	46
11: Configuring the network settings of the receiver	52
12: Preparing a computer to use as a server	52
Guide to on-screen display operation	54
Playback	57
Enjoying sound/images from the component connected to the receiver	57
Enjoying sound/images from the components connected to the DIGITAL MEDIA PORT	58
Operating the TDM-iP50 using the GUI menu of the receiver	59
Tuning	62
Listening to FM/AM radio	62
Presetting FM/AM radio stations	64
Listening to satellite radio	65
Connecting a satellite radio tuner	65
Preparing to listen to a satellite radio	66
Selecting a channel of the satellite radio	66
Presetting satellite radio channels	68
Restricting access to specific channels (Parental Lock)	68
Enjoying Surround Sound	72
Playing back with 2-channel sound	72
Playing back with multi-channel surround	73
Enjoying a surround effect for music	74
Enjoying a surround effect for movies	76
Using Network Features	79
About the network functions of the receiver	79
Enjoying content stored on the server	80
Using a controller	83
Listening to Rhapsody	84
Listening to SHOUTcast	87
Features of the Setup Manager application software	88
Using Multi-zone Features	90
What you can do with the Multi-zone function	90
Making a multi-zone connection	90
Setting the speakers in zone 2	94
Switching the zone setting of the remote	95
Operating the receiver from another zone (ZONE 2/ZONE 3 operations)	95
Using Other Features	97
Using “BRAVIA” Sync features	97
Switching the monitors that output the HDMI video signals	99
Outputting the HDMI signals even when the receiver is in standby mode (Pass Through)	100
Switching between digital and analog audio	101
Enjoying the sound/images from other inputs (Input Assign)	102
Using the sleep timer	104
Enjoying the surround effect at low volume levels (Night Mode)	104
Recording using the receiver	105
Switching the command mode of the receiver and the remote	106
Using a bi-amplifier connection	107
Adjusting Settings	109
Using the setting menu	109
Auto Calibration	110
Speaker settings	112
Surround settings	116
EQ settings	117
Multi Zone settings	117
Audio settings	119
Video settings	121
HDMI settings	123
Network settings	124
Quick Click settings	127
System settings	127
Operating without connecting to a TV	129
Operating Each Component Using the On-screen Remote (Quick Click)	136
Operating components or lighting connected to the receiver using the on-screen remote (Quick Click)	136
Using Quick Click	137
Setting components that are operated by the on-screen remote	142
Performing several commands in sequence automatically with Quick Click (Macro Play)	142
Setting remote control codes that are not stored in Quick Click	144
Resetting the remote code for Quick Click	145
Operating Each Component Using the Multifunction Remote	146
Operating each component using the multifunction remote	146
Programming the remote	147
Performing several commands in sequence automatically (Macro Play)	151
Setting remote commander codes that are not stored in the remote	152
Clearing all the contents of the remote’s memory	154
Additional Information	155
Precautions	155
Troubleshooting	156
Specifications	163

Match case Limit results 1 per page

Getting Started

You can switch the usage of the speaker(s)

connected to the SURROUND BACK/

FRONT HIGH/ZONE 2 terminals in

accordance with the intended use. Be sure to

set “Sur Back Assign” before you perform

auto calibration.

Press MENU.

The menu is displayed on the TV screen.

Press

repeatedly to select

“

Settings,” then press

The Settings menu list appears on the TV

screen.

Press

repeatedly to select

“Speaker,” then press

Press

repeatedly to select

“Sur Back Assign,” then press

Press

repeatedly to select

the parameter you want, then

press

Press RETURN/EXIT

Note

This setting is available if the speaker pattern is set

so that there are no surround back speakers and no

front high speakers.

You can select the front speakers you want to

drive.

Press SPEAKERS (A/B/A+B/OFF)

repeatedly to select the front

speaker system you want to drive.

You can confirm which set of terminals (

) are selected by checking the indicators in

the display window.

Note

This setting is not available when headphones are

connected.

Setting the surround back

speakers

Parameter

Explanation

OFF

The SURROUND BACK/

FRONT HIGH/ZONE 2

terminals can be used for a

surround back speakers or

front high speakers

connection.

BI-AMP

The SURROUND BACK/

FRONT HIGH/ZONE 2

terminals can also be used

for a bi-amplifier

connection (page 107).

ZONE2

The SURROUND BACK/

FRONT HIGH/ZONE 2

terminals can also be used

for a zone 2 connection

(page 90).

Selecting the front speakers

Indicators

Selected speakers

SP A

The speakers connected to the

FRONT

terminals.

The speakers connected to the

FRONT

terminals.

SP AB

The speakers connected to both the

FRONT

and FRONT

terminals (parallel connection).

“SPK OFF” appears in the display

window.

No audio signals are output from any

speaker terminals, or the PRE OUT

jacks.

SPEAKERS (A/B/A+B/OFF)