Sony STR-DA4600ES Operating Instructions (Large File - 17.22 MB) - Page 43
: Setting the speakers, Press MENU., Press, repeatedly to select, Settings, then press, Speaker - replacement
View all Sony STR-DA4600ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Getting Started 2 Hold down ?/1 for 10 seconds. The receiver will be rebooted. When the lamp above ?/1 flashes in green, the reboot is complete. Inserting batteries into the remote Insert two R6 (size-AA) batteries in the RMAAL034 remote commander, and the RMAAU061 remote commander. Observe the correct polarity when installing batteries. RM-AAL034 RM-AAU061 Notes • Do not leave the remote in an extremely hot or humid place. • Do not use a new battery with old ones. • Do not mix manganese batteries and other kinds of batteries. • Do not expose the remote sensor to direct sunlight or lighting apparatuses. Doing so may cause a malfunction. • If you do not intend to use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion. • When you replace the batteries, the programmed remote codes may be cleared. If this happens, program the remote codes again (page 147). Tip When the remote no longer operates the receiver, replace all the batteries with new ones. 9: Setting the speakers Setting the speaker impedances Set the appropriate speaker impedance for the speakers you are using. V/v/b, RETURN/ EXIT O MENU 1 Press MENU. The menu is displayed on the TV screen. 2 Press V/v repeatedly to select " Settings," then press or b. The Settings menu list appears on the TV screen. 3 Press V/v repeatedly to select "Speaker," then press . continued 43GB