Sony STR-K7100 Service Manual - Page 1

Sony STR-K7100 - Multi Channel Av Receiver Manual

Page 1 highlights

SERVICE MANUAL Ver. 1.0 2007.03 STR-K7100 US Model Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic" and the double-D symbol are trademarks of Dolby Laboratories. "DTS" and "DTS Digital Surround" are trademarks of DTS, Inc. This receiver incorporates High-Definition Multimedia Interface (HDMITM) technology. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. The XM name and related logos are registered trademarks of XM Satellite Radio Inc. AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 6 ohm loads, both channels driven, from 120 - 20,000 Hz; rated 90 watts per channel minimum RMS power, with no more than 1% total harmonic distortion from 250 milliwatts to rated output. Amplifier section Power Output 1) Stereo mode (rated) (6 ohms, 1 kHz, THD 1%) 90 W + 90 W Surround mode (reference) (6 ohms, 1 kHz, THD 10%) RMS Output 2) FRONT: 140 W/ch CENTER: 140 W SURROUND: 140 W/ch 1) Measured under the following conditions: Area code US Power requirements 120 V AC, 60 Hz 2) Reference power output for front, center and surround speakers. Depending on the sound field settings and the source, there may be no sound output. SPECIFICATIONS Inputs Analog Sensitivity: 800 mV/ 50 kohms Digital (Coaxial) Impedance: 75 ohms Outputs (Analog) AUDIO OUT Voltage: 800 mV/10 kohms SUB WOOFER Voltage: 2 V/1 kohm Tone Gain levels ±6 dB, 1 dB step Reproduction frequency range: 28 - 20,000 Hz FM tuner section Tuning range Antenna Antenna terminals Intermediate frequency 87.5 - 108.0 MHz FM wire antenna 75 ohms, unbalanced 10.7 MHz - Continued on next page - MULTI CHANNEL AV RECEIVER 9-887-608-01 2007C04-1 © 2007.03 Sony Corporation Home Audio Division Published by Sony Techno Create Corporation 1

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74

1
SERVICE MANUAL
US Model
STR-K7100
MULTI CHANNEL AV RECEIVER
Amplifier section
Power Output
1)
Stereo mode (rated) (6 ohms, 1 kHz, THD 1%)
90 W + 90 W
Surround mode (reference) (6 ohms, 1 kHz, THD 10%)
RMS Output
2)
FRONT: 140 W/ch
CENTER: 140 W
SURROUND: 140 W/ch
1)
Measured under the following conditions:
Area code
Power requirements
US
120 V AC, 60 Hz
2)
Reference power output for front, center and surround
speakers. Depending on the sound field settings and the
source, there may be no sound output.
SPECIFICATIONS
Inputs
Analog
Sensitivity: 800 mV/
50 kohms
Digital (Coaxial)
Impedance: 75 ohms
Outputs (Analog)
AUDIO OUT
Voltage: 800 mV/10 kohms
SUB WOOFER
Voltage: 2 V/1 kohm
Tone
Gain levels
±
6 dB, 1 dB step
Reproduction frequency range:
28 – 20,000 Hz
FM tuner section
Tuning range
87.5 – 108.0 MHz
Antenna
FM wire antenna
Antenna terminals
75 ohms, unbalanced
Intermediate frequency
10.7 MHz
Ver. 1.0
2007.03
9-887-608-01
2007C04-1
© 2007.03
Sony Corporation
Home Audio Division
Published by Sony Techno Create Corporation
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol are
trademarks of Dolby Laboratories.
“DTS” and “DTS Digital Surround” are trademarks of
DTS, Inc.
This receiver incorporates High-Definition
Multimedia Interface (HDMI
TM
) technology.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.
– Continued on next page –
The XM name and related logos are registered
trademarks of XM Satellite Radio Inc.
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
With 6 ohm loads, both channels driven, from 120 – 20,000 Hz;
rated 90 watts per channel minimum RMS power, with no
more than 1% total harmonic distortion from 250 milliwatts
to rated output.