Sony XAV-602BT Operating Instructions - Page 39

Picture There is no picture/picture noise occurs.  A connection has not been made correctly.  Check the connection between this unit and other equipment, and set the input selector of the equipment to the source corresponding to this unit.  The disc is defective or dirty.  Installation is not correct.  Install the unit at an angle of less than 45° in a sturdy part of the car.  The parking cord (light green) is not connected to the parking brake switch cord, or the parking brake is not applied.  Activate the video output of the iPod. The picture does not fit in the screen.  The aspect ratio is fixed on the DVD. There is no picture/picture noise occurs in the rear monitor.  A source/mode which is not connected is selected. If there is no input, no picture appears in the rear monitor.  The color system setting is incorrect.  Set the color system to [PAL] or [NTSC] according to the connected monitor (page 23).  The picture of the rear view camera is displayed on this unit.  No picture appears in the rear monitor if the picture of the rear view camera is displayed on this unit. Sound There is no sound/sound skips/sound cracks.  A connection has not been made correctly.  Check the connection between this unit and the connected equipment, and set the input selector of the equipment to the source corresponding to this unit.  The disc is defective or dirty.  Installation is not correct.  Install the unit at an angle of less than 45° in a sturdy part of the car.  The MP3 file sampling rate is not 32, 44.1, or 48 kHz.  The WMA file sampling rate is not 32, 44.1, or 48 kHz.  The AAC file sampling rate is not 44.1 or 48 kHz.  The MP3 file bit rate is not 48 to 192 kbps.  The WMA file bit rate is not 64 to 192 kbps.  The AAC file bit rate is not 40 to 320 kbps.  The unit is in pause/reverse/fast-forward mode.  The settings for the outputs are not made correctly.  The DVD output level is too low (page 16).  The volume is too low.  The ATT function is activated.  The format is not supported (such as DTS).  Check if the format is supported by this unit (page 30). Sound is noisy.  Keep cords and cables away from each other. Disc operation The disc does not play.  The disc is defective or dirty.  The disc is not playable.  The DVD is not playable due to the region code.  The disc is not finalized (page 31).  The disc format and file version are incompatible with this unit (page 30, 31).  Press  to remove the disc. MP3/WMA/AAC/Xvid/MPEG-4 files do not play.  Recording was not performed according to the ISO 9660 level 1 or level 2 format or the Joliet or Romeo expansion format (DATA CD), or the UDF Bridge format (DATA DVD) (page 31).  The file extension is incorrect (page 31).  Files are not stored in MP3/WMA/AAC/Xvid/ MPEG-4 format.  If the disc contains multiple file types, only the selected file type (audio/video) can be played.  Select the appropriate file type using the list (page 14). MP3/WMA/AAC/Xvid/MPEG-4 files take longer to play than others.  The following discs take a longer time to start playback.  a disc recorded with a complicated tree structure.  a disc recorded in Multi Session/Multi Border.  a disc to which data can be added. The disc does not start playing from the beginning.  Resume playback or multi-disc resume playback (page 27) has taken effect. Certain functions cannot be performed.  Depending on the disc, you may not be able to perform operations such as stop, search, or repeat/shuffle play. For details, refer to the manual supplied with the disc. The soundtrack/subtitle language or angle cannot be changed.  Use the DVD menu instead of the direct selection button on the remote commander (page 12).  Multilingual tracks, multilingual subtitles, or multi-angles are not recorded on the DVD.  The DVD prohibits changing. The operation buttons do not function. The disc will not eject.  Press the reset button (page 6). 39GB