Sony XAV-9000ES Help Guide - Page 55
Listening Position, Vinyl Processor, Advanced
View all Sony XAV-9000ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Listening Position Selects the listening position: [Front Left], [Front Right], [Front], [All], [Off], [Custom]. ([All] is not available when [Speaker Configuration] is set to [Front 2-way].) You can adjust the position of the sound image by correcting the arrival time of the sound according to the sitting position of the car. When selecting [Custom], [Time Alignment] appears. You can adjust the distance from each speaker to the listening position in 0.1 inch or 1 cm increments (unit switchable) to correct the time it takes for the sound to reach the listening position. Vinyl Processor Activates or deactivates the vinyl processor function. Advanced The following [Subwoofer Output], [Crossover], [Parametric EQ], and [Speaker Configuration] settings require expertise in sound tuning. Subwoofer Output Switches the subwoofer output: [Summed Mono], [Stereo]. Crossover Adjusts the cut-off frequency, slope, and subwoofer phase. When [Speaker Configuration] is set to [Front & Rear]: Item Detail High Pass Filter Adjusts the cut-off frequency of the front/rear speakers. Low Pass Filter Selects the cut-off frequency of the subwoofer. Slope Adjusts the slope of the front/rear speakers and subwoofer. Phase Selects the subwoofer phase: [Normal], [Reverse]. When [Speaker Configuration] is set to [Front 2-way]: 55