Sony XAV-W650BT Operating Instructions - Page 27
USB playback, NFC function, BLUETOOTH function, There is no ringtone.
View all Sony XAV-W650BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Certain functions cannot be performed. Depending on the disc, you may not be able to perform operations such as stop, search, or repeat/shuffle play. For details, refer to the manual supplied with the disc. The soundtrack/subtitle language or angle cannot be changed. Multilingual tracks, multilingual subtitles, or multi-angles are not recorded on the DVD. The DVD prohibits changing. The operation buttons do not function. Press the reset button (page 7). The disc will not eject. The disc will not insert. Press and hold the disc eject button. USB playback Items cannot be played via a USB hub. Connect iPod/USB devices to this unit without USB hub. Items cannot be played. Reconnect the USB device. The USB device takes longer to play. The USB device contains large-sized files or files with a complicated tree structure. The sound is intermittent. The sound may be intermittent at a high bit rate of more than 320 kbps. Audio file cannot be played. USB device formatted with file systems other than FAT16, FAT32, or exFAT are unsupported.* * This unit supports FAT16, FAT32, and exFAT, but some USB device may not support all of these. For details, refer to the operating instructions of each USB device or contact the manufacturer. NFC function One touch connection (NFC) is not possible. If the smartphone does not respond to the touch. Check that the NFC function of the smartphone is turned on. Move the N-Mark part of the smartphone closer to the N-Mark part on this unit. If the smartphone is in a case, remove it. NFC receiving sensitivity depends on the device. If One touch connection with the smartphone fails several times, make the BLUETOOTH connection manually. BLUETOOTH function The other BLUETOOTH device cannot detect this unit. Set [Bluetooth Connection] to [ON] (page 18). While connecting to a BLUETOOTH device, this unit cannot be detected by another device. Terminate the current connection and search for this unit from the other device. The disconnected device can be reconnected by selecting from the list of registered devices. Connection is not possible. Check the pairing and connection procedures in the manual of the other device, etc., and perform the operation again. The name of the detected device does not appear. Depending on the status of the other device, it may not be possible to obtain the name. There is no ringtone. Raise the volume while receiving a call. The talker's voice volume is low. Raise the volume during a call. The other party says that the volume is too low or high. Adjust the [MIC Gain] level (page 15). Echo or noise occurs during call conversations. Reduce the volume. If ambient noise other than the phone call sound is loud, try reducing this noise. Shut the window if road noise is loud. Lower the air conditioner if the air conditioner is loud. The phone sound quality is poor. Phone sound quality depends on reception conditions of the cellular phone. Move your car to a place where you can enhance the cellular phone's signal if the reception is poor. The volume of the connected BLUETOOTH device is low or high. Volume level will differ depending on the BLUETOOTH device. Reduce the volume level differences between this unit and the BLUETOOTH device (page 13). The sound skips during audio streaming or the BLUETOOTH connection fails. Reduce the distance between the unit and the BLUETOOTH device. If the BLUETOOTH device is stored in a case which interrupts the signal, remove the case while using the device. 27GB