Sony XAV-W650BT Operating Instructions - Page 9

Connecting a USB Device, Connecting Other Portable Audio/Video Devices

Get Sony XAV-W650BT PDF manuals and user guides View all Sony XAV-W650BT manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

8 If passkey* input is required on the BLUETOOTH device, input [0000]. * Passkey may be called "passcode," "PIN code," "PIN number," "password," etc., depending on the BLUETOOTH device. Input passkey [0000] When pairing is made, stays lit. 9 Select this unit on the BLUETOOTH device to establish the BLUETOOTH connection. or lights up when the connection is made. Note While connecting to a BLUETOOTH device, this unit cannot be detected by another device. To enable detection, enter the pairing mode and search for this unit from another device. To start playback For details, see "Playing a BLUETOOTH Device" (page 13). To cancel pairing Perform step 5 to cancel the pairing mode after this unit and the BLUETOOTH devices are paired. Connecting with a paired BLUETOOTH device To use a paired device, connection with this unit is required. Some paired devices will connect automatically. 1 Press HOME, then touch [Settings]. 2 Touch [Bluetooth Connection], then touch [ON]. Make sure that lights up on the status bar of the unit. 3 Activate the BLUETOOTH function on the BLUETOOTH device. 4 Operate the BLUETOOTH device to connect to this unit. or lights up on the status bar. To connect the last-connected device from this unit When the ignition is turned to on with the BLUETOOTH signal activated, this unit searches for the last-connected BLUETOOTH device, and connection is made automatically. If it does not work, touch [Reconnect] to search for the last-paired device again. If the problem is not solved, follow the pairing procedure. Note While streaming BLUETOOTH audio, you cannot connect from this unit to the cellular phone. Connect from the cellular phone to this unit instead. Connecting a USB Device 1 Turn down the volume on the unit. 2 Connect the USB device to the unit. To connect an iPod/iPhone, use the USB connection cable for iPod (not supplied). Connecting Other Portable Audio/Video Devices 1 Turn off the portable audio/video device. 2 Turn down the volume on the unit. 3 Connect the portable audio/video device to the AUX input jack on the unit with a connecting cord (not supplied). 4 Press HOME, then touch [AUX]. To match the volume level of the connected device to other sources Start playback of the portable audio/video device at a moderate volume and set your usual listening volume on the unit: Touch , then set [Input Level] between -10 and +15. To set to the device type manually Touch , then set [AUX Input] to [Audio], [Video], or [Auto]. 9GB

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
9
GB
8
If passkey* input is required on the
BLUETOOTH device, input [0000].
*
Passkey may be called “passcode,” “PIN code,”
“PIN number,” “password,” etc., depending on the
BLUETOOTH device.
When pairing is made,
stays lit.
9
Select this unit on the BLUETOOTH device
to establish the BLUETOOTH connection.
or
lights up when the connection is made.
Note
While connecting to a BLUETOOTH device, this unit
cannot be detected by another device. To enable
detection, enter the pairing mode and search for this
unit from another device.
To start playback
For details, see “Playing a BLUETOOTH Device”
(page 13).
To cancel pairing
Perform step 5 to cancel the pairing mode after this
unit and the BLUETOOTH devices are paired.
To use a paired device, connection with this unit is
required. Some paired devices will connect
automatically.
1
Press HOME, then touch [Settings].
2
Touch [Bluetooth Connection], then
touch [ON].
Make sure that
lights up on the status bar of
the unit.
3
Activate the BLUETOOTH function on the
BLUETOOTH device.
4
Operate the BLUETOOTH device to
connect to this unit.
or
lights up on the status bar.
To connect the last-connected device from
this unit
When the ignition is turned to on with the
BLUETOOTH signal activated, this unit searches for
the last-connected BLUETOOTH device, and
connection is made automatically.
If it does not work, touch [Reconnect] to search for
the last-paired device again. If the problem is not
solved, follow the pairing procedure.
Note
While streaming BLUETOOTH audio, you cannot
connect from this unit to the cellular phone. Connect
from the cellular phone to this unit instead.
Connecting a USB Device
1
Turn down the volume on the unit.
2
Connect the USB device to the unit.
To connect an iPod/iPhone, use the USB
connection cable for iPod (not supplied).
Connecting Other Portable
Audio/Video Devices
1
Turn off the portable audio/video device.
2
Turn down the volume on the unit.
3
Connect the portable audio/video device
to the AUX input jack on the unit with a
connecting cord (not supplied).
4
Press HOME, then touch [AUX].
To match the volume level of the connected
device to other sources
Start playback of the portable audio/video device
at a moderate volume and set your usual listening
volume on the unit:
Touch
, then set [Input Level] between –10 and
+15.
To set to the device type manually
Touch
, then set [AUX Input] to [Audio], [Video],
or [Auto].
Connecting with a paired BLUETOOTH
device
[0000]
Input passkey