Stihl BR 550 Product Instruction Manual - Page 22
Throttle Cable. - timing
View all Stihl BR 550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
English When the engine begins to fire: At very low outside temperatures: If the engine is cold: N Turn the choke knob to n and continue cranking until the engine runs. If the engine is warm: N Continue cranking until the engine runs. As soon as the engine runs To switch to idle speed: N Blip the throttle trigger - the choke knob automatically returns to the run position (F) or N Turn the choke knob to the normal run position (F). N Open throttle slightly - warm up the engine for a short period. Shutting down the engine N Turn the choke knob to n. 1 N Move the setting lever to 0 - the engine stops - the setting lever springs back to the on position. If the engine does not start Choke knob If you did not turn the choke knob to n quickly enough after the engine began to fire, the combustion chamber is flooded. 452BA026 KN N Move the setting lever (1) to C. N Engage the throttle trigger (2) in the full throttle position. N Continue cranking until the engine runs. Throttle cable adjustment N Check adjustment of throttle cable - see chapter on "Adjusting the Throttle Cable". If fuel tank has been run completely dry and then refueled N After refueling, press the fuel pump bulb at least five times - even if the bulb is filled with fuel. N Set the choke knob according to engine temperature. N Now start the engine. 20 BR 500, BR 550, BR 600