Stihl BR 550 Product Instruction Manual - Page 27
Spark Arresting Screen in, Muffler, Replacing the Starter Rope, and Rewind Spring
View all Stihl BR 550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Spark Arresting Screen in Muffler In some countries the muffler is equipped with a spark arresting screen. N If the engine is down on power, check the spark arresting screen in the muffler. N Wait for the muffler to cool down. Replacing the Starter Rope and Rewind Spring Replacing the Starter Rope English N Carefully remove the rope rotor with washer (4) and pawls (5). N Use a screwdriver to pry the rope out of the starter grip. N Remove the remaining rope from the rotor and starter grip. 1 213BA018 KN 2 1 N Loosen the screws (1). N Remove the scoop (2). 452BA090 KN N Take out the screws (1). N Remove the starter cover (2). N Thread the new rope through the starter grip and tie one of the special knots shown. N Pull the knot back into the grip. 3 N Remove the spark arresting screen (3). N Clean the spark arresting screen. If the screen is damaged or heavily carbonized, fit a new one. N Refit the spark arresting screen. N Fit the scoop. 452BA091 KN N Use a screwdriver or suitable pliers to remove the spring clip (3) from the starter post. The rewind spring may pop out and uncoil during this operation - take care to avoid the risk of injury. wear face protection and work gloves. BR 500, BR 550, BR 600 25