Sub-Zero 601F 600 Series & 430 Panel Specifications - Page 4
Sub-Zero Built-In - icing up
View all Sub-Zero 601F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
BUILT-IN REFRIGERATION FRAMED DOOR PANEL SPECIFICATIONS Side-by-Side Framed (F) Models Model 661 Refrigerator Framed Panel Freezer Framed Panel W 191/8" (486) 14 5/8" (371) H 6711/16" (1719) 6711/16" (1719) Raised Panel Handle Recess Location - Refrigerator | Freezer Panel A) 38 5/32" (969) Model 642 Refrigerator Framed Panel Freezer Framed Panel W 24" (610) 15 5/8" (397) H 6711/16" (1719) 6711/16" (1719) Raised Panel Handle Recess Location - Refrigerator | Freezer Panel A) 38 5/32" (969) Model 685 Refrigerator Framed Panel Freezer Framed Panel W 24" (610) 15 5/8" (397) H 6711/16" (1719) 6711/16" (1719) Glasswell Cut-Out Dimensions 5 7/8" (150) 12 7/16" (315) Glasswell Location (Refrigerator) E) 19/16" (39) F) 28 9/16" (726) Model 632 Refrigerator Framed Panel Freezer Framed Panel W H 2711/16" (703) 6711/16" (1719) 1715/16" (456) 6711/16" (1719) Raised Panel Handle Recess Location - Refrigerator | Freezer Panel A) 38 5/32" (969) Model 695 Refrigerator Framed Panel Freezer Framed Panel W H 2711/16" (703) 6711/16" (1719) 1715/16" (456) 6711/16" (1719) Glasswell Cut-Out Dimensions 5 7/8" (150) 12 7/16" (315) Glasswell Location (Refrigerator) E) 19/16" (39) F) 28 9/16" (726) IMPORTANT NOTE: Panel specifications are for Built-In framed (F) models. Panel specifications for overlay models are on pages 24-25. For Models 685 and 695, panel thickness in the glasswell area can range from 1/4" (6) to a maximum of 11/8" (29). If the panel is thicker, you must rout out a minimum 1/4" (6) flat landing area to accommodate the bezel surrounding the glasswell. PARTIAL FRAMED DOOR PANEL OPTION Ice | Water Dispensing Framed (F) Models Model 685 Refrigerator Partial Framed Panel Freezer Partial Framed Panel W 15 5/8" (397) 15 5/8" (397) H 6711/16" (1719) 6711/16" (1719) Model 695 Refrigerator Partial Framed Panel Freezer Partial Framed Panel W 1715/16" (456) 1715/16" (456) H 6711/16" (1719) 6711/16" (1719) The partial framed accessory kit (FRAMPAR) is required for this option. Kit includes partial framed molding and classic stainless steel inset handle panels for above and below glasswell on the refrigerator door. PANEL GRILLE OPTION Framed (F) Models Models 611 and 611G Grille Panel Width W 28 3/16" (716) Models 650, 650G, 661 Grille Panel Width W 34 3/16" (868) Models 642 and 685 Grille Panel Width W 40 3/16" (1021) Models 632 and 695 Grille Panel Width W 46 3/16" (1173) 10" (254) Grille Grille Panel Height H 815/16" (227) 11" (279) Grille (standard) H Grille Panel Height 915/16" (252) 12" (305) Grille Height Grille Panel Height H 1015/16" (278) 13" (330) Grille Grille Panel Height H 1115/16" (303) 14" (356) Grille Grille Panel Height H 1215/16" (329) 15" (381) Grille Grille Panel Height H 1315/16" (354) For panel grille insert size, use width dimension listed for your model and height dimension for grille option. 11" (279) grille is standard. H 14" (356) A W W Models 661, 642 and 632 E H F W W Models 685 and 695 H W W Models 685 and 695 Partial Framed Option FRAMED PANELS To install framed panels, see the detailed procedures outlined in the Sub-Zero Built-In Installation Instructions. 21