TEAC AX-505 Owners Manual English Francais Espanol - Page 7
Connecting speakers, How to connect speakers
View all TEAC AX-505 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Connecting speakers How to connect speakers 1 Remove about one centimeter (1/2") of insulation from the end of the speaker cable and EN twist the core wires well. VVPrecautions when connecting speakers oo Connect the power plugs after all connections have been made. oo Carefully read the manuals of the devices that you are connect- ing and follow their instructions when making connections. oo When the left and right grounds are shared in a sub woofer with a built-in amplifier, for example, use might not be possible depending on connection conditions. 2 Turn the terminal cap counterclockwise to loosen it. 3 Insert the wire into the hole in the terminal post and turn the terminal cap clockwise to securely connect it. ATTENTION oo This unit works with speakers that have nominal impedances between 4 Ω and 8 Ω. Use of speakers with impedances of less than 4 Ω, in particular, could cause the protection circuit to activate and sound output to stop. In some cases, damage could even occur to this unit and the speakers. oo This unit's red terminal is positive (¥) and its black terminal is negative (^). Generally, the ¥ wire of the speaker cable is marked to distinguish it from the ^ wire of the cable. Connect the marked wire to the red ¥ terminal and the unmarked wire to the black ^ terminal. oo If the exposed end of a core wire in a speaker cable contacts another cable or terminal, a short could occur. oo Never allow speaker cables to cause a short. oo To prevent hum and noise, avoid bundling the cables together with the AC power cord or other cables. oo Connect it so that none of the wire insulation is touching the terminal. 4 Confirm that the cable is fastened securely by gently pulling the cable. Connecting with banana plugs You can also make connections using commercially-available banana plugs. First, connect the banana plugs to the speaker cables and then connect the plugs to the terminals. oo Keep the caps tightened when in use. oo Carefully read the instructions for the banana plugs that you are using. ATTENTION Notice about the European model In accordance with European safety regulations, connecting banana plugs to speaker terminals is not allowed on European models. The holes into which banana plugs could be inserted have been covered with black caps. Connect speakers using bare wires or spade lugs. If a black cap should become separated from its terminal, return it to its original position. 7